Juniper SRX-GP-24GE-POE Ficha de datos descargar pdf (Pagina 2)

Features and Beneﬁts

Table 1: XPIM Features and Beneﬁts

Feature Feature Description Benefit

16- or 24-port copper Ethernet modules • Provides GbE connectivity

• Flexible for various applications, including

multiport copper or ﬁber applications

Provides current or new infrastructure in the local

site and ports for future expansion

Connects in the 20-GbE slots (#2 and 6 slots) XPIMs use high-speed 20-GbE slots Provides 20 Gbps L2 switching between XPIM

modules and high-performance backplane

connection to the system for maximum L3-7

security and routing throughput

High-density 20-GbE switch backplane Provides additional Ethernet ports in security/

routing devices

Increases deployment ﬂexibility and cost

eectiveness for branch and midrange routing or

security platforms or both

Local switching Provides switching and broadcast across ports

in the card (soware release and conﬁguration

dependent)

Integrates switching into high-performance

branch oce and midrange secure routing

platforms to reduce operational costs and

consolidate the number of networking devices in

the branch oce or regional site

Product Options

Table 2: XPIM Options

XPIM Part Number Description

SRX-GP-24GE-POE • PoE+ Ethernet switch 24-port 10/100/1000BASE-T XPIM. Includes four SFP slots. Supports up to 24 ports

PoE+for SRX650. Double-high and double-wide. Uses four Gigabit-Backplane Physical Interface Modules

(GPIM) slots. 20 Gbps connection only.

• May only be installed in the four GPIM slots #1-2-3-4 or slots #5-6-7-8, and may not be installed in other slots.

Connects to system at 20 Gbps in slot #2 or #6, and these slots also provide full PoE power.

• Up to two of these XPIM modules can be used in the SRX650, placed in slots #1-2-3-4 and #5-6-7-8; the

SRX650 will provide L2 switching interconnect at 20 Gbps between the two.

• Supports PoE+ up to all 24 ports.

• Total PoE+ power level (30W per port) is limited by the PSU, at approximately 247 W PoE power from a single

645 WAC-POE PSU, or approximately 494 W PoE power from two 645 W AC-POE PSUs.

SRX-GP-24GE • Ethernet switch 24-port 10/100/1000BASE-T XPIM. Includes four SFP slots. Supports 24 ports Gigabit Ethernet.

Hot-swappable PIM for SRX650. Four PIM slots, double-high and double-wide. Uses four GPIM slots. 20 Gbps

connection. No PoE support (for PoE, use SRX-GP-24GE-POE).

• May only be installed in the four GPIM slots #1-2-3-4 or slots #5-6-7-8, and may not be installed in other slots.

Connects to system at 20 Gbps in slot #2 or #6.

• Up to two of these XPIM modules can be used in the SRX650, placed in slots #1-2-3-4 and #5-6-7-8, and

SRX650 will provide L2 switching interconnect at 20 Gbps between the two.

• This module does not support PoE and is not upgradeable to add PoE support.

SRX-GP-16GE-POE • PoE+ Ethernet switch 16-port 10/100/1000BASE-T XPIM. Supports up to 16 ports PoE+. Double-high uses two

GPIM slots. 20 Gbps connection in XPIM slots is available.

• Double-high—may only be installed in XPIM slots #2-4 (inserted in slot #2) or #6-8 (inserted in slot #6) for 20

Gbps backplane connection. May not be placed in other slot positions. Connects to system at 20 Gbps in slot #2

or #6. Slots #2 and #6 also provide full PoE power.

• Up to two of these 16-port XPIM modules can be used in the SRX650, only installed in slots #2-4 and #6-8.

SRX650 provides L2 switching interconnect at 20 Gbps between the two modules in slots #2-4 and #6-8 and

PoE power in those slots.

• Supports PoE+ up to all 16 ports.

• Total PoE+ power level (30W per port) is limited by the PSU, at approximately 247 W PoE power from a single

645 WAC-POE PSU, or approximately 494 W PoE power from two 645 W AC-POE PSUs.

SRX-GP-16GE • Ethernet switch 16-port 10/100/1000BASE-T XPIM. 16-port 10/100/1000BASE-T XPIM. Double-high uses two

GPIM slots. 20 Gbps connection in XPIM (20 Gbps) slots, where also double-high is available. No PoE support

(for PoE, use SRX-GP-16GE-POE).

• Double-high—may only be installed in GPIM slots #2-4 (inserted in slot #2) or #6-8 (inserted in slot #6) for 20

Gbps backplane connection. May not be placed in other slot positions. Connects to system at 20 Gbps in slot #2

or #6.

• Up to two of these 16-port XPIM modules can be used in the SRX650, placed in slots #2-4 and #6-8. SRX650

will provide L2 switching interconnect at 20 Gbps between the two in slots #2-4 and #6-8.

• This module does not support PoE and is not upgradeable to add PoE support (for PoE, use SRX-GP-16GE-

POE).

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Juniper SRX-GP-24GE-POE Ficha de datos Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Módulos de conmutación de red Juniper SRX-GP-24GE-POE